Tapping collets ER with seal and cooling channels ER32 | 470GC | < 15µm | 4,5 x 3,4Application: For machines with rigid tapping. For safe clamping of taps.

Double-clamping via two mobile and one fi xed jaw

clamping depth = 41

2x fixed and 2x steering caster

Warranty : 1 year in normal statement

154 x 54 x 17

ADJRGA = Length adjustment range

or fi xation on T-groove tables

Only nominal size d can be clamped with sealing plug for internal cooling (applicable up to 21 bar) In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet

driving ring and feather key

SK 30 without coolant exit bores on the end face

The clamping screw is drilled through

For mounting straight-shank tools